SW-Stahl 20310L Bedienungsanleitung Seite 7

20310L
Instruction
It is important that you read and understand this instruction manual before using your
engine crane. Always ensure its correct use, witch will help prevent demage and injury.
Warning
• Do not overload. Overloading could cause demage or failure of the engine crane.
• Never use the crane on an uneven floor surface as this could result in the crane tipping
over.
• Always lock the leg and jib in position before lifting a load.
• The nuts and bolts supplied with the crane are all high strength and should not be
substituted for inferior types.
• Before each use ensure that all nuts and bolts are correctly fitted and tight.
• Never exceed the save working loads indicated on the jib.
FAILURE TO FOLLOW THIS INSTRUCTIONS COULD RESULTS IN LOSS OF LOAD
AND/OR PERSONAL INJURY OR DEMAGE TO PROPERTY.
Specification
While every effort has be made to ensure accuracy of information given in this manual is
correct at the time of going to print, we reserve the right to change specification without nonce.
Lifting capacity position 1 ____________________________________________1000Kg
Lifting capacity position 2 ____________________________________________750Kg
Lifting capacity position 3 ____________________________________________500Kg
Lifting capacity position 4 ____________________________________________250Kg
Maximum lifting hight min. jib ext. ____________________________________79-1/2"
Maximum lifting hight max. jib ext. ____________________________________88-1/2"
Length of jib position 1
Length of jib position 2
Length of jib position 3
Length of jib position 4
Hight of frame ____________________________________________________6-1/4"
Length of frame ___________________________________________________49-1/4"
Overall height ___________________________________________________55-1/8"
Width of frame max. _______________________________________________37-1/2"
Distance between center of rear wheels ________________________________23-1/2"
____________________________________________35-1/2"
____________________________________________39"
____________________________________________42-1/2"
____________________________________________46"
SW-Stahl GmbH
An der Hasenjagd 3
D-42897 Remscheid
Tel. +49 (0) 2191 / 46438-0
Fax +49 (0) 2191 / 46438-40
E-Mail: info@swstahl.de
www.swstahl.de