Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Product Structure： ： ： ：
Charge: the first three CAR DVR, insert the product batteries run out of charge, and each time to keep
the 12 hours of continuous charging the battery to maximum performance.
Native built-in rechargeable lithium battery, use it the first time, please charge firstly, CAR DVR can
charge by:
1) connected to the computer charge, use the USB data cable connected to the computer, you can
charge
2), charging the charger, USB data cable and charger Block connection, then the charger plugged into
the mains socket to charge.
Note: When the battery is low, CAR DVR directly into the protected status will not turn on, charge for
it.
User Guide： ： ： ：
1． The camera turned on / off and mode switch
2． Short press "POWER" key to boot.
3． Turned on, the system default video mode, press the "OK" button to start recording video after the
press the "OK" button to suspend file and automatically Sponsor.
4. If you need to switch modes, press the "MODE" button in the suspended state switch into camera
mode, click again to enter the recording mode, click the replay mode, click again to return to the
camera mode.
5. In the suspended state, long press the "POWER" button for three seconds to turn it off.
Key Functions
The video / camera / playback mode
"POWER" button to turn the power on / off
"OK" button to confirm
"UP" key 1/2/3/4 multiple digital zoom up on key
"DOWN" key down down key 4/3/2/1 multiple digital zoom
"MODE" key camera / video / recording / replay function toggle key
"MENU" button menu function keys
Attention
： ： ： ： " " " "
Manual Setting
The camera settings / system settings
1.
Boot, press the power button in camera mode, press the "MENU" button to enter the menu setting
mode, and then through the "MODE" button (camera settings / system settings), select the camera
settings Press the "OK" button to confirm. Resolution:1280*720，848*480，640*480
2.
Video time stamp: To select the Cassette time and without time。
3.
Loop Camera: Select the camera function to open or close the loop;
4.
Loop recording time: selectable camera saved in sub-loop length of time: 2 minutes, 5 minutes, 10
minutes
Recording sound: on / off, the video with sound or without sound
Press the "OK" button to confirm the choice of a good, complete set, and then press the "MENU" to
exit mode
" " " " means"POWER"， ， ， ， " " " "
" " " " means" " " " OK" " " "
Werbung
