Troubleshooting - Beem Cucinetta Bedienungsanleitung

EN
The following table helps in localising and remedying minor faults:
Fault
Display does not switch
on
The automatic circuit
breaker in the fuse box
trips.
Oil leaks from underneath
the appliance.
NOTE
► If you cannot resolve the problem with the steps described above, please contact
customer service.
BEEM - Elements of Lifestyle

Troubleshooting

Possible cause
Automatic circuit breaker in
fuse box tripped.
Control indicator defective.
Too many appliances con-
nected to the same power
circuit.
No fault detected.
Drip pan not inserted.
Drip pan is full.
Cucinetta
Remedy
Switch on the automatic
circuit breaker again.
Contact customer service.
Reduce the number of appli-
ances on the power circuit.
Contact customer service.
Insert drip pan.
Empty drip pan.
37