Connecting Up; Connecting To Your Pioneer; Av Receiver - Pioneer IDK-80 Bedienungsanleitung

Connecting up

Chapter 3
Connecting up

Connecting to your Pioneer

AV receiver

Connect this unit to a Pioneer AV
receiver with a dedicated iPod control
cable terminal (such as the VSX-84TXSi
or VSX-AX4ASi (model name depends
on region)). You will be able to use the
remote control supplied with the
receiver to control this unit.
Caution
• Before connecting or
disconnecting this unit from your
AV receiver, make sure the power
to the AV receiver is switched off.
iPod
Music
Extras
Settings
Shuffle Songs
Backlight
This unit
>
>
iPod
>
MENU
MENU
iPod control
cable (supplied
with your
Pioneer AV
receiver)
1 Connect the terminal on this unit
to the dedicated iPod terminal on the
receiver.
Use the iPod control cable supplied
with the AV receiver. Connect both ends
as shown below (make sure the
mark on the connector is facing
upwards).
2 Place the iPod in the connector
port.
3 Plug in and switch on your AV
receiver.
Please refer to the manual supplied
with the receiver for detailed
instructions on operating the iPod
using the iPod control cable.
IN
Pioneer AV receiver with a
dedicated terminal for an
iPod control cable
03
5
En