Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Dear Customer,
Congratulations on purchasing this equipment. Please read this manual carefully and take care of the following
hints to avoid damages. Any failure caused by ignoring the mentioned items and cautions mentioned in the in-
struction manual are not covered by our warranty and any liability.
Article number
Power supply
Frequency response
Signal to noise ratio
Channel separation
• Ensure that your mains outlet has the required voltage.
• Do not open the speaker cabinet as it may cause an electric shock.
• Do not clean the unit with chemical agents such as alcohol, benzene, thinner or acids.
• Do not install the device in damp or dusty rooms.
• Avoid direct sunlight.
• Disconnect from the mains socket if you do not intend to use the unit for an extended period of time.
• 1 x 5.25" subwoofer
• 1 x centre speaker
• 4 x satellite speakers
• Remote control
• Connect the centre speaker with the yellow RCA connector
• Connect each of the satellite speakers with the white and red RCA connectors.
• Using the AUX, connect to either 2.1 devices (stereo equipment such as a TV) or 5.1 devices.
1
Connect the subwoofer to a 230 V power source.
2
Turn on the subwoofer via the 'Power' button.
3
If you have connected a 5.1 source, press the 5.1 AUX button
4
You may scroll through the different speakers via the Menu button
5
Using Vol + and Vol - you may adjust the volume of the different speakers.
6
Steps 2-5 may also be performed using the included remote control.
Technical Data
10000148 10007842 10022257
230 V ~ 50 Hz
20 Hz - 20 kHz
> 60 dB
> 40 dB
Safety Instructions
Delivery
Connection
Operation
4
Werbung
