Fox Warrior Bivvy Bedienungsanleitung Seite 3

GB
Assembly Instructions
Unfold all poles and join together, lay out dome flat on ground as shown.
1.
Push longest pole (A) through flaps from side to side.
2.
(B)
(A)
4
(B)
(B)
(B) (B)
3.
(A)
Put one end of long pole (A) into pocket then at opposite side lift bivvy whilst pulling on D ring and
4.
stretch cover and pole end of pole (A) into pocket. Repeat for poles (B).
(A)
Push 2 shorter poles (B) through flaps from back to front with
pointed end towards the front.
GB
5