Herunterladen Diese Seite drucken
Stanley Mullion Designer Installationsanleitung
Stanley Mullion Designer Installationsanleitung

Stanley Mullion Designer Installationsanleitung

Lesers

Werbung

Designer and Vandal-Resistant Readers
Installation Guide
Designer und Vandal-Resistant Lesers
Installationsanleitung
Designer et Vandal-Resistant Lecteurs
Guide d'installation
Designer y Vandal-Resistant Lectores
Guía de instalación
Designer och Vandal-Resistant Läsare
Installationsanvisningar
Designer en Vandal-Resistant Lezers
Installatiehandleiding
T81153v2.2
14104 Mar 05

Werbung

loading

Inhaltszusammenfassung für Stanley Mullion Designer

  • Seite 1 T81153v2.2 14104 Mar 05 Designer and Vandal-Resistant Readers Installation Guide Designer und Vandal-Resistant Lesers Installationsanleitung Designer et Vandal-Resistant Lecteurs Guide d'installation Designer y Vandal-Resistant Lectores Guía de instalación Designer och Vandal-Resistant Läsare Installationsanvisningar Designer en Vandal-Resistant Lezers Installatiehandleiding...
  • Seite 2 In compliance with FCC requirement 15.27 no special accessories are required in order to comply with part 15 of the FCC regulations. Changes or modifications not expressly approved by Stanley Security Solutions could void the user's authority to operate the equipment.
  • Seite 3 Connections/ Anschlüsse / Connexions / Conexiones / Anslutningar / Voedingsaansluitingen All dimensions ins/mm / Alle Ausmaße in zoll/mm / Toutes dimensions en pce/mm / Todas las dimensiones en pulg./mm /Alla mått i tum/mm / Alle afmetingen inch/mm Mullion Designer A 10.5-28V (10.5-20V for Vandal-Resistant) B SIG/D1/DATA/SIGNAL...
  • Seite 4 5. The Metal Oxide Varistor (MOV) should be fitted across the power terminals of the lock. 6. After installation of a Designer Reader, fill the connector well with silicone to seal it. Stanley recommend a high-quality sealant like Dow Corning Type 732.
  • Seite 5 4. El varistor de metal-óxido se debería montar a través de los terminales de potencia de la cerradura. 5. Tras la instalación de un Designer Lector, rellene bien el conector con silicona para sellarlo. Stanley recomiendan un sellante de alta calidad como el Dow Corning tipo 732.
  • Seite 6 T81153v2.2...
  • Seite 7 T81153v2.2...
  • Seite 8 Stanley Technology Co Ltd 1/F, Building E Zone A Hongfa Industrial Park Shi Yan Bao'an District Shenzhen 518108 T: +86 755 29833111 © 2005 Stanley Security Systems, Inc. www.stanleysecuritysolutions.com Contact your local Stanley Security Solutions Systems Integration Office for Technical Support.

Diese Anleitung auch für:

Standard designerVandal-resistant