Herunterladen Inhalt Inhalt Diese Seite drucken
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 29
Version 1.0
Published October 2014
Copyright©2014 ASRock INC. All rights reserved.
Copyright Notice:
No part of this documentation may be reproduced, transcribed, transmitted, or
translated in any language, in any form or by any means, except duplication of
documentation by the purchaser for backup purpose, without written consent of
ASRock Inc.
Products and corporate names appearing in this documentation may or may not
be registered trademarks or copyrights of their respective companies, and are used
only for identiication or explanation and to the owners' beneit, without intent to
infringe.
Disclaimer:
Speciications and information contained in this documentation are furnished for
informational use only and subject to change without notice, and should not be
constructed as a commitment by ASRock. ASRock assumes no responsibility for
any errors or omissions that may appear in this documentation.
With respect to the contents of this documentation, ASRock does not provide
warranty of any kind, either expressed or implied, including but not limited to
the implied warranties or conditions of merchantability or itness for a particular
purpose.
In no event shall ASRock, its directors, oicers, employees, or agents be liable for
any indirect, special, incidental, or consequential damages (including damages for
loss of proits, loss of business, loss of data, interruption of business and the like),
even if ASRock has been advised of the possibility of such damages arising from any
defect or error in the documentation or product.
his device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
CALIFORNIA, USA ONLY
he Lithium battery adopted on this motherboard contains Perchlorate, a toxic substance
controlled in Perchlorate Best Management Practices (BMP) regulations passed by the
California Legislature. When you discard the Lithium battery in California, USA, please
follow the related regulations in advance.
"Perchlorate Material-special handling may apply, see www.dtsc.ca.gov/hazardouswaste/
perchlorate"
ASRock Website: http://www.asrock.com

Werbung

Inhaltsverzeichnis
loading

Inhaltszusammenfassung für ASROCK Fatal1ty 970 Performance Series

  • Seite 16 English...
  • Seite 29 Fatal1ty 970 Performance Series 1 Einleitung Vielen Dank, dass Sie sich für die Fatal1ty 970 Performance Series von ASRock ent- schieden haben – ein zuverlässiges Motherboard, das konsequent unter der strengen Qualitätskontrolle von ASRock hergestellt wurde. Es liefert ausgezeichnete Leistung mit robustem Design, das ASRocks Streben nach Qualität und Beständigkeit erfüllt.
  • Seite 30: Technische Daten

    1.2 Technische Daten • ATX-Formfaktor Plattform • ASRock DuraCap (2,5-mal längere Lebenszeit) (100 % in Japan gefertigt, hochqualitative leitfähige Polymer-Kondensatoren) • Leiterplatte mit hochdichtem Glasgewebe • Unterstützung von Socket AM3+-Prozessoren Prozessor • Unterstützung von Socket AM3-Prozessoren: AMD Phenom II X6 / X4 / X3 / X2 (außer 920 / 940) / Athlon X4 / X3 / X2 / Sempron-Prozessor • Acht-Kern-CPU-bereit...
  • Seite 31 Fatal1ty 970 Performance Series Audio • 7.1-Kanal-HD-Audio mit Inhaltsschutz (Realtek ALC1150- Audiocodec) • Erstklassige Blu-ray-Audiounterstützung • Unterstützt Überspannungsschutz (ASRock Full Spike Protection) • Unterstützt Purity Sound - Nichicon-Audiokappen der Fine Gold-Serie - 115-dB-SRV-DAC mit Diferentialverstärker - TI® NE5532 – erstklassiger Headset-Verstärker (unterstützt...
  • Seite 32 • 1 x Audioanschluss an Frontblende • 1 x SPDIF-Ausgang • 3 x USB 2.0-Stitleisten (unterstützt sechs USB 2.0-Ports) (unterstützt Schutz gegen elektrostatische Entladung (ASRock Full Spike Protection)) • 1 x ASMedia ASM1042A USB 3.0-Stitleiste (unterstützt zwei USB 3.0-Ports) (unterstützt Schutz gegen elektrostatische Entladung (ASRock Full Spike Protection)) • 32-Mb-AMI-UEFI-Legal-BIOS mit Unterstützung graischer...
  • Seite 33 4 GB betragen, da unter Windows® 32-Bit OS etwas Speicher zur Nutzung durch das System reserviert wird. Unter Windows® OS mit 64-Bit-CPU besteht diese Einschränkung nicht. Mit ASRock XFast RAM können Sie den Speicher einsetzen, den Windows® nicht nutzen kann.
  • Seite 34: Jumpereinstellung

    1.3 Jumpereinstellung Die Abbildung zeigt, wie die Jumper eingestellt werden. Wenn die Jumper-Kappe auf den Kontakten angebracht ist, ist der Jumper „kurzgeschlossen“. Wenn keine Jumper-Kappe auf den Kontakten angebracht ist, ist der Jumper „ofen“. Die Abbil- dung zeigt einen 3-poligen Jumper, dessen Kontakt 1 und Kontakt 2 „kurzgeschlos- sen“...
  • Seite 35: Integrierte Stiftleisten Und Anschlüsse

    Fatal1ty 970 Performance Series 1.4 Integrierte Stiftleisten und Anschlüsse Integrierte Stitleisten und Anschlüsse sind KEINE Jumper. Bringen Sie KEINE Jumper-Kappen an diesen Stitleisten und Anschlüssen an. Durch Anbringen von Jumper-Kappen an diesen Stitleisten und Anschlüssen können Sie das Motherboard dauerhat beschädigen.
  • Seite 36 Betrieb-LED-Stitleiste Bitte verbinden Sie die (3-polig, PLED1) PLED- Betrieb-LED des Gehäuses PLED+ PLED+ (siehe S. 1, Nr. 21) zur Anzeige des System- betriebsstatus mit dieser Stitleiste. Serial-ATA-III- Diese sechs SATA-III- Anschlüsse Anschlüsse unterstützen (SATA3_0: SATA-Datenkabel für siehe S. 1, Nr. 10) interne Speichergeräte mit (SATA3_1: einer Datenübertragungs-...
  • Seite 37 Fatal1ty 970 Performance Series Audiostitleiste Diese Stitleiste dient dem OUT_RET OUT2_L (Frontblende) J_SENSE Anschließen von Audioge- MIC_RET OUT2_R (9-polig, HD_AUDIO1) räten an der Frontblende. PRESENCE# MIC2_R (siehe S. 1, Nr. 30) GN D MIC2_L 1. High Deinition Audio unterstützt Anschlusserkennung, der Draht am Gehäuse muss dazu jedoch HDA unterstützt.
  • Seite 38 CPU-Lüteranschlüsse Dieses Motherboard bietet FAN_SPEED_CONTROL FAN_SPEED (4-polig, CPU_FAN1) einen 4-poligen CPU- +12V (siehe S. 1, Nr. 4) Lüteranschluss (lautloser Lüter). Falls Sie einen (3-polig, CPU_FAN2) 3-poligen CPU-Lüter FAN_SPEED FAN_VOLTAGE (siehe S. 1, Nr. 3) anschließen möchten, verbinden Sie ihn bitte mit Kontakt 1 bis 3.
  • Seite 39 Fatal1ty 970 Performance Series Serieller-Port-Stitleiste Diese COM1-Stitleiste RRXD1 DDTR#1 DDSR#1 (9-polig, COM1) unterstützt ein Modul für CCTS#1 (siehe S. 1, Nr. 27) serielle Ports. RRI#1 RRTS#1 TTXD1 DDCD#1 SPDIF-Ausgang Bitte verbinden Sie den (2-polig, SPDIF_OUT1) SPDIF_OUT-Anschluss SPDIFOUT (siehe S. 1, Nr. 28) einer HDMI-VGA-Karte über ein Kabel mit dieser...

Inhaltsverzeichnis