Crown CT44036 Originalbetriebsanleitung Seite 15

in measuring their temperature are
possible� To increase measurement
accuracy, you may paint the surface
with matte black paint, or paste an ad-
hesive tape on it�
• Turn on the appliance� After 1 sec-
ond, LCD display 8 will show informa-
tion on the temperature measured�
The appliance will automatically turn
off after 7 seconds of idle time�
• To select
(°C/°F), press button 7� The selected
measurement units are displayed on
LCD display 8 (sign 17)�
• To turn on the laser pointer, press
button 6� When the laser pointer is on,
sign 12 appears on LCD display 8� The
laser pointer shows the measurement
location only visually, and its activation
is not mandatory� The activated laser
pointer increases energy consumption�
To turn on LCD backlight 8 (for ex-
•
ample, insufficient light), press but-
ton 9� When the backlight is on, sign 13
appears on LCD display 8� When the
backlight of LCD display 8 is on, the
power consumption increases�
The manufacturer reserves the possibility to introduce changes.
measurement
Maintenance
Cleaning the appliance
Keep the appliance clean. Do not
•
use caustic substances or solvents�
• Remove contamination from the
outlets of the laser pointer and IR
sensor, as well as the IR sensor lens,
using substances suitable for camera
units
lenses� Do not use sharp objects or
corrosive substances�
Environmental protection
packaging should be sorted for envi-
ronment-friendly recycling�
The plastic components are labelled
for categorized recycling�
These instructions are printed on re-
cycled paper manufactured without
chlorine�
English
15
Recycle raw
instead of disposing as
waste.
Appliance, accessories and
materials