Basic Operation - Philips BC 8210 Bedienungsanleitung

XP SBC BC 8210/00-1.1
Audio Connections
Option 2 (figure 4)
Connecting the FM transmitter to a
line output of an audio source, e.g.
REC OUT, LINE OUT.
1 Connect the 3.5 mm stereo plug of the
stereo audio cable (15 cm) to the FM
transmitter's 3.5 mm audio input.
2 Connect the 2 RCA plugs of the stereo
audio cable to a line output (REC OUT or
LINE OUT) of an audio source, e.g.TV, HiFi
or PC:
– Check if the red RCA plug (right
channel) is connected to the right
channel (red) of the audio source.
– Check if the white RCA plug (left
channel) is connected to the left channel
(white) of the audio source.
3 Switch on your audio source.The red
power indication LED of the transmitter
lights up if receiving an audio signal.
4 Switch on the speaker.You may hear a
hissing sound through the speaker if the
speaker is not yet properly tuned to the
transmitter.
5 To tune, turn the tuning wheel until the
signal is at its clearest.
6 In case the line output of the audio source
has an adjustable output level, adjust the
line output level of the audio source to the
highest acceptable undistorted level.
7 Adjust the volume to the desired level with
the speaker volume control.
8
20-08-2001 13:43
1 Switch on your audio source and carefully
2 Switch on the speaker.You may hear a
3 To tune, turn the tuning wheel until the
4 Adjust the volume to the desired level with
Pagina 8

Basic operation

When the FM transmitter is connected to a:
- line output of an audio source, such as
REC OUT or LINE OUT or
- headphone output of an audio source.
increase the volume of the audio source.
The red power indication LED of the
transmitter lights up if receiving an audio
signal.
hissing sound through the speaker if the
speaker is not yet properly tuned to the
transmitter.
signal is at its clearest.
the speaker volume control.