Outchair Back Up Benutzungs- Und Wartungshinweise Seite 2

Entsorgung:
Die verbrauchten, vollkommen entladenen Akkus sind über die speziell gekennzeichneten
Sammelbehälter, die Sondermüllannahmestellen oder über den Elektrohändler zu entsorgen.
Alternativ können Sie den Akku zu uns zur Entsorgung zurücksenden.
Outchair GmbH
Wilhelm-Leuschnerstr.28
61197 Florstadt
E-Mail: info@outchair.com
Telefon: +49 (0) 6035-967112
English:
We congratulate you on choosing this Outchair Product. This Product is intended for
camping and outside use and these recommendations for use and maintenance must be
observed.
Read this manual carefully, keep it for future reference, make it accessible to other users, and
follow the instructions.
Delivery:
1x Outchair Back Up, 1x battery, 1x charging cable, 1x instructions for use
Charging the battery:
Connect the battery to the supplied power cord and connect it to a 220V power outlet (or
12V with car charger in the car). The battery and power supply indicator lights red. The
battery is in charging mode. When it is green, remove the AC adapter from the wall outlet
and the battery. Your battery is now ready for use.
Instructions for the heat function of your Product:
1. Connect your charged battery to the appropriate socket in the Product. Place the wired
battery in the pocket provided so that the front of the battery is visibly up.
2. Press the power button once for 2 seconds. The battery is now active and heats up at full
power.
3. After switching on press briefly and only two indicator lights will light up. This corresponds
to the average heating power. Press the button a second time and only one indicator lamp
will light up. That corresponds to lowest heating power. If you press the button a third time,
you will have 3 lit lamps and the full heating power.
4. If you want to turn off the battery, press the button again for 2 seconds and the battery is
off.
5. By pressing the Power Button briefly just once in turned off mode you can identify the
charging level of the battery.
Recommendation: If you do not use the heat function of the Product, disconnect it from the
battery by removing the cable from the battery.
Notice: