Pairing And Connecting - LG TONE INFINIM HBS-910 Benutzerhandbuch

HBS-910 Pairing and Connecting
If you start the process after putting in your earbuds, you can easily pair and
connect following the voice prompts.
NOTE: If you are prompted for the authorization code (PIN Code), type 0000.
If you hear that the battery is insufficient, recharge the battery before
proceeding with pairing.
If pairing is not completed within 3 minutes, the power automatically turns
off. When the power automatically turns off, slide the Power switch from the
OFF to the ON position to turn the power on.
Connecting Quickly
ON OFF
OFF
1 Slide the Power switch towards the ON position to turn on the power.
2 The blue Indicator lamp turns on and the HBS-910 switches to Search mode.
3 From the mobile phone or device list, select LG HBS910 to connect.
4 A voice message will indicate that the connection is completed.
5 Use the same process to pair the HBS-910 with other devices.
Connecting Manually
1 Press and hold the Call button and slide the Power switch to the ON position to turn it on.
2 The blue Indicator lamp turns on and the HBS-910 switches to Search mode.
3 Select LG HBS910 from the device list to connect.
ON OFF
OFF
MAKE PHONE VISIBLE
LG
Allow other Bluetooth devices to nd
my phone
AVAILABLE DEVICES
LG HBS910
Search for devices
5