Herunterladen Diese Seite drucken
Di-soric UGUTI 6/70 G6-RB5 Beipackzettel

Di-soric UGUTI 6/70 G6-RB5 Beipackzettel

Ultraschall-etikettensensor

Werbung

UGUTI 6/70 G6-RB5
Ultraschall-Etikettensensor
Ultrasonic-Label Sensor
Fourches à ultrasons pour étiquettes
di-soric GmbH & Co. KG
Steinbeisstraße 6
DE-73660 Urbach
Fon: +49 (0) 71 81 / 98 79 - 0
Fax: +49 (0) 71 81 / 98 79 - 179
info@di-soric.com
www.di-soric.com
210259
BN
1
npn
npn
WH
2
S
Stabilitäy / stability
BK
4
Etikett erkannt
S
Label detected
pnp
pnp
BU
3
T+
Teach extern
GY
5
T
Keys unlocked
T
open
T-
Keys locked
BN
= braun/brown/marron
WH
= weiß/white/blanc
BK
= schwarz/black/noir
GY
= grau/grey/gris
BU
= blau/blue/bleu
Technische Daten (typ.)
Technical data (typ.)
Betriebsspannung
Service voltage
Eigenstromaufnahme
Internal power consumption
Schaltausgang
Switching output
Max. Schaltstrom
Max. power operating
Etikettenzwischenraum
Label interspace
Schnittstelle
Interface
Umgebungstemperatur
Ambient temperature
Schutzart
Protection class
Anschluss
Connection
Sicherheitshinweis
Diese Geräte sind nicht zulässig für
Sicherheitsanwendungen, insbesondere bei
denen die Sicherheit von Personen von der
Gerätefunktion abhängig ist.
Der Einsatz der Geräte muss durch
Fachpersonal erfolgen.
Stand 28/07/17, Änderungen vorbehalten
R2
Ø5.2
Ø4.2
19
11
5
0
Freiblasö nung
M5x0.8 - 6H
Opening for air nozzle
Pin 5
Pin 3
Pin 4
Caractéristique techniques
Tension d'alimentation
Courant absorbé
Sortie de commutation
Espace inter-étiquettes
Interface
Température d'utilisation
Indice de protection
Connexion
Safety instructions
The Instruments are not to be used for safety
applications, in particular applications in which safety
of persons depends on proper operation of the
instruments.
These instruments shall exclusively be used by
qualified personnel.
State of the art 28/07/17, subject to modifications
11
M12-5pol
R2
10.5
70
Pin 2
Pin 1
LED rot
LED gelb
LED grün
26.5
39.9
51.9
90
+20°C, 24 V DC
18 ... 30 V DC 
< 40 mA 
Gegentakt (2x)/Push pull (2x)/Push-pull (2x), NO/NC,
umschaltbar/switchable/commutable 
100 mA, (je Ausgang)/(per output) 
> 2 mm 
IO-Link V1.1, COM2 (38,4kBd), Smart Sensor Profile 
0 ... +60 °C 
IP 67 
M12, 5-polig/5-poled/5 pôles 
Instructions de sûreté
La mise en œuvre de ces appareils doit être effectuée
par du personnel qualifié. Ils ne doivent pas être
utilisées pour des applications dans lesquelles la
sécurité des personnes dépend du bon fonctionnement
du matériel.
Situation 28/07/17, sous réserve de modification
mm (typ.)

Werbung

loading

Inhaltszusammenfassung für Di-soric UGUTI 6/70 G6-RB5

  • Seite 1 Pin 3 LED gelb LED grün Pin 4 = braun/brown/marron 26.5 = weiß/white/blanc 39.9 di-soric GmbH & Co. KG = schwarz/black/noir 51.9 Steinbeisstraße 6 = grau/grey/gris mm (typ.) DE-73660 Urbach = blau/blue/bleu Fon: +49 (0) 71 81 / 98 79 - 0 Fax: +49 (0) 71 81 / 98 79 - 179 Technische Daten (typ.)
  • Seite 2 Ultraschall Etikettensensor Ultrasonic Label Sensor Mechanische Belastungen: Mechanical loads: Der Sensor ist gegen mechanische Belastungen z.B. The sensor has to be protected against mechanical stress Stöße und Schläge zu schützen. e. g. shocks and impacts. Der Sensor darf in beliebiger Einbaulage montiert wer- The sensor can be mounted in any position, however den, hierbei ist eine erschütterungsfreie und schwin- a vibration-free or vibration-dampening assembly must...
  • Seite 3 Statischer Einpunkt-Teach auf Etikett: Static single-point teach on label: Taste 4-6 Sek. drücken: Press key for 4-6 sec. Statischer Einpunkt-Teach auf Etikett Static single-point teach on label Hinweis: Note: Nach Abschluss des Teachvorgangs ist die After having concluded the teach process check the Teach-Einstellung in der Etikettenlücke / Etikett auf label gap/label on a sufficient functional reserve.