Herunterladen Diese Seite drucken

Montage / Installation - AWT Brugge series Montage- Und Bedienungsanweisung

Werbung

Attentions
Attentions
Inhalt

Montage / Installation

1. Bohren Sie die Löcher für den Spiegel.
Hängen Sie den Spiegel mit Hilfe des Montagematerials auf.
1. Drill the holes for the mirror installation.
Install the mirror by using the enclosed mounting material.
3. Führen Sie die Anschlussschläuche der Armatur durch
das Loch und Schrauben Sie die Armatur fest.
3. Lead the water connection pipe through the hole and
fix the faucet on the basin or workdesk.
5. Bohren Sie die Löcher für de Seitenschrank (optional)
und hängen Sie diesen auf.
5. Drill the holes for the side cabinet (optionally) and install it.
Montage / Installation
2. Bohren Sie die Löcher für den Unterschrank.
Hängen Sie den Unterschrank mit Hilfe des Montagematerials auf
und justieren Sie die Aufhängung.
2. Drill the holes for the main cabinet.
Install the main cabinet by using the enclosed mounting material and
adjust the mounting bracket.
4. Setzen Sie das Waschbecken (ggf. Arbeitsplatte) auf den
Unterschrank und silikonieren Sie dieses.
4. Place the basin (opt. workdesk) on the main cabinet and
fix it with silicon.
6. Schließen Sie alle Armaturen und Abflüsse an. Prüfen Sie
anschließend alle Verbindungen auf Dichtigkeit.
6. Make sure all drains and water connection pipes are connected
well and doesn´t leaking.
6

Werbung

loading

Verwandte Produkte für AWT Brugge series

Diese Anleitung auch für:

Milano series