Installation - Artesyn Embedded Technology Rtm-Atca-F140 Series Benutzungs- Und Sicherheitshinweise

Safety Notes
Operation of this equipment in a residential area is likely to cause harmful interference in which
case the user will be required to correct the interference at his own expense. Changes or
modifications not expressly approved by Artesyn could void the user's authority to operate the
equipment. Products are tested in a representative system to show compliance with the above
mentioned requirements. A proper installation in a compliant system will maintain the
required performance. Use only shielded cables when connecting peripherals to assure that
appropriate radio frequency emissions compliance is maintained.

Installation

Damage of the RTM and Additional Devices and Modules
Before installing or removing additional devices or modules, read the respective
documentation.
Incorrect installation of additional devices or modules may damage the product or the
additional devices or modules.
Damage of Circuits
Electrostatic discharge and incorrect product installation and removal can damage circuits or
shorten their life.
Before touching the product, make sure that you are working in an ESD-safe environment.
Hold the product by its edges and do not touch any components or circuits.
Damage of the RTM
Incorrect installation of the RTM can cause damage to the RTM.
Use handles when installing/removing the RTM to avoid damage/deformation to the face plate
and/or PCB.
Damage to RTM/Backplane or System Components
Bent pins or loose components can cause damage to the RTM, the backplane, or other system
components. Carefully inspect the RTM and the backplane for both pin and component
integrity before installation.
6 RTM-ATCA-F140 Series Safety Notes Summary (6806800P19C)