Herunterladen Diese Seite drucken

Manhattan Sound Science 165129 Anleitung Seite 2

Ledbluetooth-lautsprecher mit schultergurt

Werbung

HINWEIS: Laden Sie den Lautsprecher vor dem ersten Gebrauch einmal
vollständig auf. Schließen Sie dazu das beiliegende Ladekabel an die
Ladebuchse und einen PC oder ein USB-Ladegerät an. Sobald der Akku
geladen ist, halten Sie
gedrückt, um den Lautsprecher einzuschalten.
Tasten
: 3 Sekunden gedrückt halten, um den Lautsprecher ein- oder auszuschalten
: Drücken, um den Koppeln-Modus zu aktivieren; achten Sie darauf,
dass Bluetooth an Ihrem Mobilgerät aktiviert ist und wählen Sie aus
der Liste "SoundScience-165129" oder "SoundScience-165358" aus.
+ : drücken für den nächsten Song; gedrückt halten,
um die Lautstärke zu erhöhen
– : drücken für den vorherigen Song; gedrückt
halten, um die Lautstärke zu senken.
: Wiedergabe starten/unterbrechen
Modi
• MicroSD-Karte: Legen Sie eine MicroSD-Karte ein,
um Musik von dieser Karte abzuspielen.
• USB: Schließen Sie einen USB-Stick an, um
Musik von diesem Stick abzuspielen
• AUX-Kabel: Schließen Sie den Lautsprecher per Audiokabel mit 3,5
mm-Klinkenstecker an Geräte wie Handy, PC oder Tablet an.
Die Spezifikationen finden Sie auf manhattanproducts.de.
SoundScience-
165129
SoundScience
165358
ENGLISH: Sound Science Bluetooth® Speaker
NOTE: Before first use, make sure the speaker is fully charged. Connect the
speaker to any computer or 5V wall charger with the provided USB cable.
Once charged, press and hold the
Buttons
: Press for about 3 seconds to turn the speaker on or off
: Press to set to pairing mode; make sure Bluetooth is turned
on in your device and select "SoundScience-165129" or
"SoundScience-165358" from the Bluetooth device list.
+ : press for the next song; press and hold to turn up the volume.
– : press for the previous song; press and hold to turn down the volume.
: Starts or stops audio playback
Modes:
• MicroSD Card: Insert a MicroSD card to switch
to playback from a memory card.
• USB: Insert a USB stick to playback from that stick
• AUX: Connect the speaker physically to your phone, computer, tablet or
other device with a 3.5 mm audio cable for wired playback from that device.
For specifications, go to manhattanproducts.com.
-
button to turn the speaker on or off.

Werbung

loading

Diese Anleitung auch für:

Sound science 165358