Inhaltsverzeichnis
Werbung
WALL MOUNT FOR FLAT SCREEN
Before putting this product into operation, please read carefully all the instructions, even
if you are already familiar with using similar products. Use the product only as described
in this manual. Keep this manual in case you need it for future reference.
EN
The electronic version of this user manual can be downloaded on the website
www.connectit-europe.com.
We recommend keeping the original packaging of the product, invoice and warranty
certificate at least for the time the warranty is valid. When shipping the product, we rec-
ommend using the original packacking that the product was delivered in that will provide
the best protection for it from being damaged during transport.
1
Warning
„ The wall or the surface used for securing the mount must have sufficient strength and
maximum load to secure the weight of the mount, the screen and other accessories.
„ When installing the screen, use an assistance of another person.
„ During the installation, tighten the screws properly, but make sure not to strip the
threads. That could damage the installed screen or significantly decrease the maximum
load of the mount.
„ This wall mount is designed for indoor use only. Outdoor use may cause harm, damage
to the mount or the installed screen.
„ Check the stability and safety of the mount at least every three months.
2
Specifications
„ Quick and easy assembly
„ Screws and concrete anchors included
„ Full-motion wall mount
„ Fits most 37"-70" flat panels
„ VESA 200×200, 300×300, 400×200, 400×400, 600×400 mm compliant
„ +10°/-20° continuous adjustable tilt
„ ±90° left/right lateral rotation
„ Extend from 62-475 mm
„ Max. load capacity: 50 kg
CI-786 • CI-787
USER MANUAL
Werbung
Inhaltsverzeichnis
