Start; Quick Set Up - PURE Milano Bedienungsanleitung

Start

Quick set up > Overview of controls and connectors > Symbols on the screen

Quick set up

Uncoil the aerial wire and hang it vertically, then connect the mains adapter to the
bottom of the unit as shown.
Plug the mains adapter into the mains supply and press the Standby button.
Set energy saving mode.
Press the Select button when you see the message 'Enable energy saving?'.
Press Select again to switch on energy saving mode.
Enable energy
saving?
When energy saving mode is switched on, the radio uses less power because it does
not collect and store Intellitext messages in standby. It still collects and stores Intellitext
messages while the radio is switched on (see page 11).
With energy saving mode switched on, the power consumption of Milano in standby is
less than 1 Watt.
For more information: Intellitext
Wait until Milano completes an Autotune for available radio stations (about a minute).
PURE milano
Start
2
5.5V DC
Energy saving
On
> page 9 energy saving mode
BBC Radio 2
32
1
~
Text the show on
> page 11