Uplink 301429 Handbuch Seite 8

3 Attributes
With this HDMI switch you can connect up to five devices to an HDMI port. The
switch detects if a connected device is turned on and switches automatically to the
appropriate channel. Optionally, you can also switch manually between five chan-
nels by using the button on the top of the device or the remote control.
4 Initial startup
Please take the HDMI switch and infrared receiver out of the package. Then con-
nect the cable of the infrared receiver with the "IR" socket on the HDMI switch.
Unpack the remote control and remove the strip that sticks sticking out of the
battery compartment on the backside. Turn off all devices you want to connect and
connect then with an appropriate HDMI cable with the switch.
Devices which are built for the European market, should always provide a 5 volt
power supply according to the HDMI specifications. However, some devices are
not able to provide this energy.
In this case, you could connect the power supply included in the scope of delivery
with the 5V DC barrel connector of the HDMI switch.
5 Auto-Select function
The HDMI switch will automatically select the active port. It has the following pri-
ority: Input 1 > Input 2 > Input 3 > Input 4 > Input 5. When a new input device is
turned on the HDMI switch will automatically select this input. If this device is then
turned off the switch will automatically select the input with a higher priority and
an active signal.
6 Safety instructions and liability disclaimer
Never try to open the device to carry out repairs or conversions. Avoid contact
with mains voltages. Do not short-circuit the product. The device is not certified
for use in the open air; only use it in dry conditions. Protect it from high humidity,
water and snow. Keep it away from high temperatures. Do not subject the device
to sudden changes in temperature or heavy vibration as this might damage elec-
tronic components.
8
English