Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
CD Recording
Allows you to configure options for recording from a CD:
The Recording Speed setting allows you to reduce the
speed at which audio is extracted from the CD during the
recording process. When the Reject Damaged Tracks
option is set to off the maximum recording speed will be
increased, however damaged compact discs may produce
errors in the recording. Any changes to these settings will
take effect the next time a CD is recorded.
Language
Allows you to select the language for the TV user
interface - languages available are English, French,
German, Italian, and Spanish.
System Information
Shows the serial number, production date, and software
version number of your Music Server. You may need to
quote these if you contact Marantz for technical support.
System Settings
Provides a series of menus to allow you to change the
hardware configuration on your Music Server:
The following table summarises the settings available on
each of the System Settings menus:
Option
Description
Allows you to specify the following settings
when connecting to the internet via the
built-in modem: number of connection
Modem Settings
retries, whether to use tone or pulse
dialling, and the modem initialisation
string.
Allows you to specify how your Music
Server obtains an IP address when
connected to an Ethernet network. The
Mode option allows you to select whether
the IP address is set Manually, by a DHCP
Server on the network, or by a BOOTP
Server. If the Manual option is selected,
use the Manual Ethernet Settings option
Ethernet Settings
to specify an IP Address, IP Mask and
Gateway. If DHCP or BOOTP is selected
the IP address, IP Mask and Gateway will
be set automatically. Once the Mode
option has been set correctly the assigned
IP address, IP Mask, Gateway, DNS 1, and
DNS 2 will be displayed as well as the
MAC address of the unit.
Allows you to configure options for accessing
the Music Server music collection from a
home computer via the Ethernet connection.
Server Access
For more information see the chapter called
Using your Music Server with a Portable
Player p.36.
Allows you to specify the IP Address and
Proxy Server Settings
Port Number for internet access via a proxy
server if required.
Specifies the communication speed for the
Controller Settings
Controller port on the rear of the unit.
Specifies whether the unit is configured for
Video settings
PAL or NTSC use.
Select this option if instructed to set up
Remote Diagnostics
your modem to receive incoming calls
from technical support staff.
Output Settings
The volume setting of each individual output of the Music
Server may be configured as either variable or fixed.
Any changes made to the output settings will only affect
the currently selected output (shown on the status icons).
If the volume setting is set to fixed the output level is set to
maximum and the balance is set to the central position. In
this mode the N and O Mute keys on the Music Server
remote control do nothing*.
If the volume setting is set to variable the output level can
be altered at any time using the N and O Mute keys on
the Music Server remote control. A Balance option is also
available from the Volume Settings menu which allows
you to adjust the left/right balance.
*Note: The Music Server remote control can be configured
so that when the HDD Audio device is selected the N
and O Mute keys operate the volume and mute controls
on an amplifier. For more information see the chapter
called Configuring your remote to control other
devices p.11.
Upgrade Unit
Select this option when supplied with a XiVA software
upgrade disk for your Music Server.
30
Werbung
Inhaltsverzeichnis
