Pahlen 125820 Gebrauchsanleitung Seite 8

Outlet
For the pool framework made of wood, metal or plastic - finished with liner
Item No. 125820 Classic
Install as below:
1. Make a hole in the frame according to the template and mount the flange with the
supplied screws and mounting plate on the pool inside (see diagram).
2. Fix self-adhesive packing (t=1,5mm) onto the flange.
3. Install the pool liner and begin flooding.
4. When the water reaches around 5 cm below the outlet nozzle, cut a small cross in the liner in the
center of the nozzle hole. Install packing (t=2mm) and sealing.
5. Trim the liner below the sealing inside edge.
6. Install the front with Pahlén logo on top.
7. Fill the pool with water up to the desired level.
Flange
Pool frame
plywood/sheet
Mounting washer
Countersunk screw M5x30 (4 pcs)
Pool framework
Surface treatment
E
The tolerance class in accordance with this
part of ISO 2768-1
Box 728, SE-194 27 Upplands Väsby, Sweden
Phone +46 8 59411050, Fax +46 8 59086880
Foam
Self-adhesive packing t=1,5 mm
Inloppsmunstycke / Inlet
Sugmunstycke / Outlet
Spa-belysning / Spa light
Dimension drawing for holes in pool wall
Foam
Liner

78

6 (4x)
Designed by:
Assembly drawing no.
Installationsbild tunnvägg
för pool med duk
Liner
Countersunk screw M5x16 (6 pcs)
Countersunk screw
M5x20 (2 pcs)
Front
Sealing ring
Packing t=2 mm
8
ENGLISH
UP
UP
NOTE! Not 1:1 scale
for technical reasons
Drawn by: Date Approved by:
TK 2016-12-14
Art.no. 125820
Scale Revised by: Date
Drawing number Rev.no.
M12645 0

70-76
UP
Flange
UP
Sealing ring
Surface treatment
E
The tolerance class in accordance with this Assembly
part of ISO 2768-1
Installationsbil
för pool med d
Box 728, SE-194 27 Upplands Väsby, Sweden
Phone +46 8 59411050, Fax +46 8 59086880