Product Overview; Battery Power - Chauvet DJ FlareCON Air 2 Kurzanleitung

To Begin
Unpack your FlareCON Air 2 and make sure you have received all parts in good condition. If the box or contents appear
damaged, notify the carrier immediately, not Chauvet.

Product Overview

Hook and Loop
Fastener Strap
To power the product ON or OFF, press and hold the <MENU> + <ENTER> buttons for 3 seconds.
AC Power
This product has an auto-ranging external power supply that can work with an input voltage range of 100 to 240 VAC,
50/60 Hz.
To eliminate wear and improve its lifespan, during periods of disuse completely disconnect the
product from power via breaker or by unplugging it.

Battery Power

The FlareCON Air 2 comes with a rechargeable lithium battery for cable free operation.
Charging the Battery
The battery charges whenever the FlareCON Air 2 is plugged into the external charger and the charger is plugged into a
power source. If the product is plugged in and not in operation, make sure the product is turned off.
When using the external power supply, charge the FlareCON Air 2 while the unit is powered OFF.
Battery Life Indicator
The indicators on the LED Menu Display show how much battery life remains available. The drawing below provides a key
to reading the battery life indicators.
Battery Run Time
Maximum Run Time (all colors on)
FlareCON Air 2 QRG Rev. 5
QUICK REFERENCE GUIDE
80% 60%
Up to 8 hours
Micro USB port
Control Buttons
100%
40%
Recharge Time
4 hours
Antenna
DMX Adapter In
OLED Display
20%
EN
2