Troubleshooting - Phorus PS10 Schnellstartanleitung

Troubleshooting

Check the Wi-Fi light on the back of your PS10 Speaker.
Wi-Fi light is not pulsing during set-up
Wi-Fi light is solid: device is already connected to a Wi-Fi
network.
Wi-Fi light is blinking: device is trying to connect to the Wi-Fi
network.
Wi-Fi light is double blinking then it is in WPS set-up mode.
Set-Up fails
If set-up fails multiple times then the speaker may be too far from
the router.
Go to https://phorus.com/support/ps10 for more
troubleshooting help or to contact customer support.
12 EN