First Boot; Usb Host - External Storage Connection - Toshiba STOR.E TV Benutzerhandbuch

Following the audio/video connection, your TV should now display the
STOR.E TV welcome screen. If not, you may need to change the input
source on your TV to HDMI, component or composite, depending on your
connection. Check the user documentation of your TV if necessary.

First Boot

When STOR.E TV will boot for the first time, you will have to select your
language using the remote control. Use the UP/DOWN buttons to select
the language you wish to have and press the ENTER. If your language is
not available, please check the "System Firmware Upgrade" section as
Toshiba may propose other languages through a firmware update.
USB Host – External Storage Connection
STOR.E TV is also able to playback multimedia files from any USB external
storage device (USB key or USB external hard disk drive for example)
using the USB HOST connection. It is compatible with USB mass storage
devices using FAT or NTFS file system only.
IMPORTANT NOTE
To read and playback multimedia files from your USB device:
1. Power off your STOR.E TV
2. Plug your USB device on the USB HOST
3. Power on your STOR.E TV
4. Select on the main menu the "USB" option
User's Manual
USB host does not support USB hubs.
STOR.E TV
EN-13