Save Scene - Dekolight 843000 Bedienungsanleitung

Product-Notes
Manual
Article No.: 843000
13.2. Playback Color
● Press the C button to activate the manual mode.
● Afterwards you press the numeric button where you have saved the desired color.
● The LED indicator light will flash and the stored color is played.
13.3. Fade Time setting for the color change
● Hold for about 5 second the button „C" until all LEDs turn on once. Then, release the button and the button
flashes repeatedly.
● Choose one of these buttons 1-4, P, C, B or S according to set the fade time
Key 1 2
Fade- 1s 2s 3s 4s 0s (keine
Time
● All indicator lights will flash once to confirm the setting.
● The existing mode ends and automatically switches to normal operation.

14. Save scene

Up to 9 scenes can be saved in manual mode on the numeric keypad.
● Press the P or S button for 1 second to activate the automatic mode. The following is a key tone and the
indicator lights.
● Turn the dial to selct the desired program or adjust the speed.
● Keep the numeric key on which you want to store the Scene button for 2 seconds..
● All indicator lights will flash once to confirm that the scene has been recorded with the appropriate speed
and brightness adjustment to the number key.
● To save additional scenes on the numeric keys, repeat the steps.
14.1. Playback scene
● Press the P or S button to activate the automatic mode.
● Then press the numeric key on which you have saved the desired scenen.
● The LED indicator light will flash and the stored scene is played back.
14.2. Save scene - Lock / Unlock
● To lock save the scene, press and hold the key S and P pressed for 10s.
● The S button is not available now.
● To unlock save the scene, press and hold the key S and P pressed for 10s.
● The S button is now available again.
Deko-Light Elektronik-Vertriebs GmbH
www.deko-light.com / deko@deko-light.com
Technical Data can be changed without advance notice. Errors excepted.
3 4 P/C/B/S
Fade-Zeit)
25.01.2019
8/9