2.2.2 Weekly
2.2.2.1
Example : Weekly program
Zone A
Select the step wanted from 0 to 6
Day
Step number- Start time
Histogram of the day:
- Hours in abscissa (0 to 24)
- Setpoints in ordinate (C, R
N or OFF)
Adjustment
Select the menu "Weekly program Zone A"
Select "Setting" to program a week day.
Each day get a maximum of 7 programming steps numbered from 0 to 6.
For each step, set the start time and the end time and the setpoint desired
("TC", "TR", "TN" or "OFF").
Select Setting
Adjust the time of start and
end.
(Start only for the step 0)
If the number of the last step is less than 6, confirm your program until
going out by pressing the key
If the number of the last step is 6, confirm your program by pressing
the key
Select the day to program
Choose the setpoint desired
[TC : Comfort / TR : Reduced
/ TN : Night / OFF]
(after validation, the screen
go to the next step)
End time - Setpoint
Zone