Before Using For The First Time; Operation - Hoyer DB 1750 C3 Bedienungsanleitung

5. Before using for the
first time
1. Ensure that you have pulled out the
mains plug 8.
2. Open the lid 2 (of the water tank).
3. Pour water into the measuring beaker 16
and half-fill the water tank 10.
4. Insert the mains plug 8 into a wall sock-
et corresponding to the technical data.
5. Set the temperature controller 13 to
MAX.
The temperature control lamp 11 lights
up.
6. When the device has reached the de-
sired temperature (temperature control
lamp 11 goes out), iron an old cotton
cloth in steam mode until the water
tank 10 is empty.

6. Operation

DANGER!
The sole plate 15 becomes very hot
during operation. During operation
touch only the handle 6 and the control
elements of the steam iron.
Even during short interruptions, always
place the steam iron on the base unit 9
and never on its sole plate 15. There is
a fire hazard!
NOTES:
• Not all materials are suitable for iron-
ing. Follow the care instructions, e.g. in-
side the clothing.
• You may notice an odour when using
for the first time. This is a result of the
manufacturing process and is not a de-
fect with the device. Ensure adequate
ventilation.
The sole plate 15 cools down slightly during
ironing. In order to reach the set temperature
again, the device heats the sole plate 15 up
again, during which the temperature control
lamp 11 is lit. The temperature control
lamp 11 goes out again when the set tem-
perature is reached. This process repeats it-
self during ironing.
Simply continue ironing during the heating
phase.
43
GB