Herunterladen Inhalt Inhalt Diese Seite drucken

Eldom MIKO SI1000 Gebrauchsanweisung Seite 11

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 18
Before the first use, all parts of the appliance that are in contact with food must be
thoroughly washed (see: Cleaning and maintenance).
For the best results, use milk with fat content over 3.0%.
Warm milk frothing
Place the tank (7) in the base (8).
Set the spring (5) on the tip (4).
Pour milk into the tank in the volume not exceeding the maximum level -
Place the lid (1) with the sealing gasket (2) and the frothing tip.
Activate the appliance with the button (9). The control light will go on (9) to start the
frothing process.
The appliance will switch off automatically, and the control light will go off. The appliance
may be turned off at any time with the button (9).
Then remove the lid (1).
While holding the appliance by the handle (6), remove the tank (7) from the base and
pour out the milk to a cup. If needed, use a wooden spoon so as not to damage the coat
of the tank.
Cold milk frothing
Place the tank (7) in the base (8).
Set the spring (5) on the tip (4).
Pour milk into the tank in the volume not exceeding the maximum level -
Place the lid (1) with the sealing gasket (2) and the frothing tip.
Activate the appliance with the button (10). The control light will go on (10) to start the
frothing process.
The appliance will switch off automatically, and the control light will go off. The appliance
may be turned off at any time with the button (10).
Then remove the lid (1).
While holding the appliance by the handle (6), remove the tank (7) from the base and
pour out the milk to a cup. If needed, use a wooden spoon so as not to damage the coat
of the tank.
Heating up milk
Place the tank (7) in the base (8).
Make sure that the spring (5) is removed from the tip (4).
Pour milk into the tank in the volume not exceeding the maximum level -
Place the lid (1) with the sealing gasket (2) and the mixing tip.
Activate the appliance with the button (9). The control light will go on (9) and the
heating process will start.
The appliance will switch off automatically, and the control light will go off. The appliance
may be turned off at any time with the button (9).
Then remove the lid (1).
While holding the appliance by the handle (6), remove the tank (7) from the base and
pour out the milk to a cup.
CZ
11

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis