Herunterladen Inhalt Inhalt Diese Seite drucken

Product Description; Operation - Dorr W-16 Bedienungsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1

02 | PRODUCT DESCRIPTION

Multifunctional work light for workshop, camping, hunting and outdoor use.
Brightness adjustable in 2 levels (100%, 30%)
Cordless operation
Built-in Lithium-Ion battery, rechargeable via supplied power adapter
Robust plastic housing
Swivel-mounted base including magnet
Useful belt loop with fold-out hook for hanging
03 | NOMENCLATURE
01
Main LED
02
Base
03
Magnet
04 Battery compartment cover
05
Micro USB charging socket
06 LED auxiliary light
07
Belt clip
08 Fold-out hook for hanging
09 Charging/power indicator
10
On/Off button
11
USB adapter
12
Micro USB charging cable
04 | BUILT-IN LI-ION BATTERY
Before first use of the work light, please fully charge the built-in Li-Ion battery with the supplied power adapter:
Slide the battery compartment cover (4) open. The Micro USB charging socket is now available. Connect the Micro USB charging cable (12) with the USB Adapter (11) and the
Micro USB charging socket (5). Plug the USB Adapter (11) into a power outlet. The work light will be charged. This will be shown with flashing LEDs (9). When the built-in Li-Ion
battery is fully charged, the blue LEDs of the charging indicator (9) will light up constantly. Unplug the Micro USB charging cable (12) from the work light. Disconnect the USB
adapter (11) from power supply. Close the battery compartment cover (4) again.
Alternatively, you may charge the work light by every power source with USB socket (e.g. PC, Laptop, 12V car adapter).

05 | OPERATION

<5
Press On/Off button (10)
sec.
once
Turn on 30% brightness
(Main LED)
NOTE
When the work light is set to a brightness level longer than 5 seconds and you press On/Off button (10) it will turn off directly.
While operation the power indicator (9) will show the remaining battery level as follows:
4 blue LEDs = <100%
3 blue LEDs = <75%
2 blue LEDs = <50%
1 blue LED = <25%
<5
Press On/Off button (10)
Press On/Off button (10)
sec.
2nd time
100% brightness
(Main LED)
<5
Press On/Off button (10)
sec.
3rd time
100% brightness
(LED auxiliary light)
07
4rd time
Off

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis