Kingstone DataTraveler 4000 G2 DM Anleitungen Seite 5

Setup (Windows Environment)
1. Insert the DT4000G2DM into an available USB port
on your notebook or desktop and wait for Windows
to detect it.
 Windows Vista/7/8/10 users will receive a device
driver notification as seen in
Once the new hardware detection is complete,
Windows will prompt you to begin the initialisation
process.
 Windows Vista/7/8/10 users will see an AutoPlay
window similar to the one in
2. Select the option '
If Windows does not AutoPlay, you can browse to the
CD-ROM partition (
Figure 2.3
the DT4000G2DM program. This will also start the
initialisation process.
Figure 2.3 – DT4000G2DM Contents
Device Initialisation (Windows Environment)
Document No. 480DT4000G2DM.A00
Figure 2.1
Figure 2.2
'.
Run Kingston.exe
) and manually execute
DataLocker Managed Solution
.
Figure 2.1 – Device Driver Installation
.
(
Note: Menu options in the AutoPlay
window may vary depending on what
programs are currently installed on
your computer. AutoRun will start the
initialisation process automatically.
Figure 2.2 – AutoPlay Window
)
Page 4 of 11