Plug & Play 4066 R Bedienungsanleitung Seite 11

DESCRIPTION:
The 4066R 32Bit PCI bus Plug & Play 8S I/O card is equipped with eight High-
Speed RS-232.V24 Standard Serial-Interface. The serial port 32 Byte FIFO, the speed
Up to 921 KB/Sec. The 4066R include eight 25 pin male connector for attaching
peripherals' units with Serial RS-232 Standard Interface.
Check your packing listing:
4066R Card
62Pin 8 (25Pin) cable on set
Software Driver on CD
Hardware Guide on CD
Installation Guide
Hardware Specification
Serial Port:
UART Chipset:
Compatible chips: with 16C650, 16C550 and 16C450
IEEE standard:
Driver Chipset:
Max. Speed:
Hardware Jumper and Connect
Hardware installation guide:
•
Turn off the power of your computer
•
Plug-in the 4066R MIO Parallel Adapter to PCI bus of your computer
•
Add-on the peripheral (Printer, Modem, Scanner... etc.) that you need to this
Adapter
•
Turn on the power of your computer
PCI device listing display (for example...)
Bus No Device
No
0 7
0 13
SUN1889, SUN 1669, Hardware FIFO are 16 Byte FIFO
RS-232 Interface
TI-75232, speet up to 100 Kb/SECs, lenght 300-500M
Up to 921 KB/Sec
Func Vendor
No ID
1 8086
0 1409
Device Device Class
ID
IDE Controller
7010
Simple COMM.
7268
Controller
IRQ
14
10