Setting Alarm; Setting The Time - NGS SUNRISE HIT Handbuch

USER'S MANUAL

SETTING ALARM

1 Radio must be switched off in order to set alarm.
2 Press and hold VOL+/AL1 (3) or VOL–/AL2 (4) button until
time flashes on display screen depending on whether you
want to set alarm 1 or 2.
3 Press TUNING+/HR (6) and TUNING–/MIN (7) buttons
to set desired alarm time. Once the alarm time has been
selected, wait 5 seconds to confirm it.
4 You can now select the type of alarm you want. There are 2
options:
1. Press the VOL+/AL1 (3) or VOL-/AL2 (4) button until the
screen shows the AL1 BUZZER (14) or AL2 BUZZER (16)
indicator.
2. Radio: Press the VOL+/AL1 (3) or VOL-/AL2 (4) button
until the screen shows the AL1 Radio Indicator (15) or AL2
Radio Indicator (17).
This product has 2 alarms: AL 1 and AL 2. Both work in the
same way.
To turn off the alarm, press the POWER (1) button.
4
CANCELLING ALARM SETTINGS
Press VOL+/AL1 (3) or VOL–/AL2 (4) buttons until buzzer or
radio alarm indicator disappear. This cancels the alarms.

SETTING THE TIME

1 Radio must be switched off in order to set the digital clock.
2 Press and hold SET (9) button until time flashes on display
screen, and then press TUNING+/HR (6) and TUNING–/MIN
(7) buttons to set correct time.