nedis FSBS110AT Kurzanleitung Seite 5

Pair with Bluetooth
1. Slide the power switch A 5 to turn on the product.
2. Press and hold the mode button A 4 to enter pairing mode.
The status indicator LED A 7 lights up and the product emits a
4
tone to indicate pairing mode is active.
3. Activate Bluetooth on your audio source and connect with the
product (FSBS110).
4. If asked, enter the pairing code '0000' .
The product emits a tone to indicate successful pairing.
4
Connect with audio cable (Image B)
Audio cable is not included.
4
To pair the audio source to the product using an audio cable, follow
these steps:
1. Slide the power switch B 6 to turn on the product.
2. Plug the audio cable B 1 into the audio port B 5 to connect the
product to your media device.
Switch between modes
• Press and hold the mode button A 4 to switch between time
mode and Bluetooth mode.
Control the audio
• Press the -button A 1 to decrease the volume.
• Press the +button A 2 to increase the volume.
• Press the mode button A 4 to pause or continue playing a track.
Set the time
This function is only available in time mode.
4
1. Press and hold the +button A 2 for 2 seconds.
The hours start blinking to indicate they can be adjusted.
4
2. Use the +button A 2 and the -button A 1 to adjust.
3. Press and hold the +button A 2 for 2 seconds.
The minutes start blinking to indicate they can be adjusted.
4
4. Use the +button A 2 and the -button A 1 to adjust.
5. Press and hold the +button A 2 for 2 seconds.
The time is now set.
4
BS110AT_MAN_COMP_(19373)_v02.indd 5
5
13-8-2019 15:16:2