Cleaning And Storage; Technical Data - Gima TD001P-3 Gebrauchs- Und Instandhaltungsanleitung

Automatic mode to see the results:
• Press the red button once. "SCAN" will flash. All the obtained results (TIME, RPM, CALORIES) will be
displayed. They will appear for 5 seconds approximately.
Manual mode to see the results:
• In order to set the function you want to see during the exercise, and to pass from one function to the
next, press 2 times consecutively the red button to set the desired function on the screen (TIME, CAL,
RPM). If you press the red button only once, it returns to automatic mode without setting any particular
function.
NOTE: To set the counter to "ZERO": press the red button for some seconds. All the indicators will be set
to "0".
3. Batteries replacement: Remove the counter (g) for its original position using the notches located around
the counter. You will reach the battery cabinet and there you can replace it without using any tool
(as fig. 3).

CLEANING AND STORAGE

• Clean first with a damp cloth and then a dry cloth.
• Keep the appliance in a safe place.
• In order to storage the device, pull the rings untill both bases stop being fixed.

TECHNICAL DATA

1,5V 1 = x LR44 1,5V
This device conforms to the safety requirements and provisions of directives 2014/35/EU on Low tension
devices and 2014/30/EU on Electromagnetic Compatibility.
PROTECTION OF THE ENVIROMENT - DIRECTIVE 2011/65/EU
This product has been designed and manufactured with high quality materials and components that can be
recycled and reused.
When you see the symbol of a crossed out litter bin on wheels next to a product, this means that the
product conforms to the European Directive 2011/65/EU.
Please obtain information about the local recycling system for electric and electronic products.
Follow the local rules and do not dispose of used products by throwing them in the normal bins at home.
Proper recycling of your used product will help avoid negative impacts on the environment and people's
health.
ENGLISH
6