Galileo YP300 Gebrauchshandbuch Seite 16

YP300/GYP300
owner's manual
(F5)Decay Env.
Allows you to edit the envelope of all the presets that do not normally have decay (Organ,
Strings, Choir), replacing the sustain phase with a decay one.
These sounds will benefit from this effect only in the case where they are in one layer with a
sound with decay (Grand Piano, El Piano, Vibes, Harpsichord, Guitar).
It 'a very useful feature if you are playing a layer such as Grand Piano+ Strings: the envelope
of all the sounding notes, including the notes of strings, will decay slowly as it does for the
sound of the piano.
Values:
ON (default): Organ, Strings and Choir, when coupled to a sound having decay, also will decay.
OFF: Organ, Strings and Choir sound at their normal envelope that provides the sustain phase.
TEMPO/DATA
(F6)Transpose Lower
This function allows you to traspose by octaves the
Sound on the left side of the keyboard (Lower part).
Pressing the ENTER button the display shows the
TEMPO/DATA
current value (default: 0, No transpose). Press the
TEMPO/DATA button to edit the value (-3, -2, -1,
0, +1, +2, +3)
(F7)Transpose Upper
This function allows you to traspose by octaves the
Sound on the right side of the keyboard (Upper part).
Pressing the ENTER button the display shows the TEMPO/DATA
current value (default: 0, No transpose). Press the
TEMPO/DATA button to edit the value (-3, -2, -1, 0,
+1, +2, +3)
(F8)MIDI
This function allows you to edit the piano MIDI configurations on your piano.
The ENTER button allows you to choose one of these functions: CHN - LOC.
Select a function by using the TEMPO/DATA button. Press ENTER to edit the function.
CHN: This function allows you to select the MIDI channel
for both receiving and transmitting data (In and OUT),
Function
Enter
from 1 to 16. To set the midi channel (valid for both
TEMPO/DATA PROGRAM
transmitting and receiving data) choose the number using
the TEMPO/DATA in a range from 01 to 16.
Edit the the value using the TEMPO/DATA buttons.
Press ENTER to confirm.
EN 11