Collector's Display Cabinet
Introduction
Before assembling and using the product for the first time, take time
to familiarise yourself with the product first. Read the following
assembly instructions and safety instructions carefully. Only use
the product as described and for the designated areas of application. Please
keep these instructions in a safe place. If you hand this product on to a third
party, you must also pass on all documents relating to the product.
Proper use
This article is intended for storing and displaying small, lightweight objects.
The product is intended for private indoor use only. Any use other than previ-
ously mentioned or any product modification is prohibited and can lead to
injuries and / or product damage. The manufacturer is not liable for any dam-
ages caused by any use other than for the intended purpose. The product is
not intended for commercial use.
Description of parts
1
Top panel
2
Bottom panel
3
Side frames
4
Back panel
5
Glass panels (sides)
6
Glass shelves
7
Doors
8
Dowels (approx. ø 5.8 x 30 mm)
9
L-shaped metal plate
10
Screws (approx. ø 3.5 x 14 mm)
Magnetic door stopper
11
Glass support dowels (including 2 x spares)
12
Metal pins
13
Screws (approx. ø 4 x 27 mm)
14
Hinge caps
15
Screws (approx. ø 3 x 10 mm)
16
Door hinges
17
Hexagonal spanner
18
Hexagonal screw (approx. ø 7 x 50 mm)
19
Plastic caps
20
Feet
21
Dowels (approx. ø 8 mm)
22
Wall-mount-screws (approx. ø 4.5 x 60 mm)
23
Lock
24
Metal plate
25
Plastic rings
26
Screws (approx. ø 3.5 x 20 mm)
27
Nuts
28
Door handle
29
Metal stirrups
30
Bump cushion for metal stirrup
31
Bump cushion for door handle
32
Key
33
Lock with keyhole
34
Connection plate
35
Striker plate
36
Plain washer
37
Screw (approx. ø 3.5 x 7 mm)
38
Plastic caps for wall-mount screws
39
67190_Sammlervitrine_content_LB7.indd 3
Supply scope
Note: Take care when unpacking that you do not inadvertently throw away
any assembly material.
Immediately after unpacking, check that the delivery is complete and that the
product and all its parts are in perfect condition. Do not under any circum-
stances assemble the product if the delivery is incomplete.
1 Top panel
1 Bottom panel
2 Side frames
1 Back panel
2 Glass panels (sides)
10 Glass shelves
2 Doors
10 Dowels (approx. ø 5.8 x 30 mm)
1 L-shaped metal plate
4 Screws (approx. ø 3.5 x 14 mm)
1 Magnetic door stopper
42 Glass support dowels (including 2 x spares)
2 Metal pins
4 Screws (approx. ø 4 x 27 mm)
6 Hinge caps
12 Screws (approx. ø 3 x 10 mm)
6 Door hinges
1 Hexagonal spanner
12 Hexagonal screw (approx. ø 7 x 50 mm)
6 Plastic caps
4 Feet
4 Dowels (approx. ø 8 mm)
4 Wall-mount-screws (approx. ø 4.5 x 60 mm)
1 Lock
1 Metal plate
2 Plastic rings
18 Screws (approx. ø 3.5 x 20 mm)
2 Nuts
1 Door handle
2 Metal stirrups
2 Bump cushion for metal stirrup
1 Bump cushion for door handle
2 Key
1 Lock with keyhole
1 Connection plate
1 Striker plate
1 Plain washer
1 Screw (approx. ø 3.5 x 7 mm)
4 Plastic caps for wall-mount screws
1 Assembly and installation instructions
Technical data
Dimensions (without feet):
approx. 68 x 110 x 20 cm (W x H x D)
Max. load:
1 kg per shelf
Safety advice
KEEP ALL THE SAFETY ADVICE AND INSTRUCTIONS IN A SAFE PLACE
FOR FUTURE REFERENCE!
RISK OF LOSS OF LIFE OR ACCIDENT
TO INFANTS AND CHILDREN! Never leave children un-
supervised with the packaging materials. Danger of suffocation.
CAUTION! RISK OF INJURY! Make sure that all parts are undamaged
and assembled correctly. Improper assembly carries a risk of injury.
Damaged parts may affect the safety and function of the product.
Make sure that this product is standing on a solid, level surface.
Wall mounting is necessary otherwise the product may tip over.
Introduction / Safety advice
GB/CY
3
24.05.11 17:25