Included In The Box - Miroir Ultra Pro Schnellstartanleitung

Battery Indicator Lights - Lights flash in turn as the device charges.
A
The battery is fully charged when all the lights illuminate and no longer flash.
B
Lens Cover/Power - Slide lense
Battery charging lights will flash in turn during projector power on
C Projection Lens
Audio Out (3.5mm) - (Optional) Connect an external speaker or headphones.
D
HDMI Video Input - Connect an HDMI cable to a device that supports HDMI
E
video output.
USB Power Output - Connect a USB power cable to provide power to a HDMI
F
streaming stick or to charge a smartphone battery. Cannot be used for video
input.
USB-C Charge/Video Input - Connect the supplied USB-C Charge/Video
G
cable to a device that supports USB-C video output, or connect the supplied
USB-C Charge/Video cable to your MacBook Pro AC Adapter to charge
the projector's internal battery. Note: Projector battery will not charge and
project simultaneously via a USB-C connection. Fully charge the battery
before first use (approximately 4-5 hours).
H Reset Button - Press to reset projector.
I DC Power Input
HDMI 2 USB USB-C Reset
J
Source Input Button - Press to change input source.
K
Focus Mode - Press button then use volume +/- buttons to adjust.
L
Volume Controls - Increase/decrease the volume output of the projector.
M
Rubber Foot Pads - Provides stability and proper airflow to cooling vents.
N
Cooling Vent
Tripod Mount - Will fit a standard sized tripod screw. Tripod not included.
O

Included in the Box:

ro HDMI Adapter
Start Guide
DC IN
Press Volume - button to see battery level remaining.Z
rge/Video Cable
cover to turn device on.
AUDIO
AUDIO HDMI 1
AC Adapter/Charger
rojector Drawstring Pouch
HDMI 1 HDMI 2 USB
HDMI 2 USB
USB-C Reset DC IN
USB-C Reset DC IN
3