Folding And Unfolding; Charging The Battery - rawlink 36756 Gebrauchsanweisung

Folding and unfolding

Turn the lock button (6) to the FOLDING
position.
Press and hold the release button (7) and
tilt the handlebar around 90 degrees up or
down until it clicks into place in the folded or
unfolded position.
Let go of the release button and tilt the
handlebar back and forth.
The release button should be � ush with the
exterior.
Turn the lock button to the RIDING position
to block the release button so that it cannot
be pressed unintentionally.
You can screw the handles on or off the
handlebar by turning them clockwise or
anticlockwise.

Charging the battery

Insert the connector from the charger into
the charging socket on the battery.
Insert the other connector from the charger
into a mains socket.
The diode will show a red light while the
battery is charging.
A full charge takes 4 hours. Make sure to
unplug the charger after 4 hours to improve
battery performance.
When charging is complete, the LED will be
green and the charger will automatically turn
off .
Use
Switch the scooter on by holding the on/off
button (19) in until the display lights up.
Switch on the � xed front light by pressing
and holding the > button (20) for
2-3 seconds.
Switch the scooter off by holding the on/off
button (19) in until the display switches off .
GB
29