Herunterladen Inhalt Inhalt Diese Seite drucken

HDMI QC5000-ITX/WiFi Bedienungsanleitung Seite 6

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 22
* HDMI and DisplayPort 1.2 cannot output at the same time. You can only choose either one of them. Please refer
to the BIOS setup option "HDMI/DP Switch" on page 43 of user manual in the support CD.
** There are two LEDs on each LAN port. Please refer to the table below for the LAN port LED indications.
ACT/LINK LED
SPEED LED
LAN Port
Activity / Link LED
Status
Off
Blinking
On
*** If you use a 2-channel speaker, please connect the speaker's plug into "Front Speaker Jack". See the table below
for connection details in accordance with the type of speaker you use.
Audio Output
Channels
2
4
6
8
To enable Multi-Streaming, you need to connect a front panel audio cable to the front
panel audio header. After restarting your computer, you will find the "Mixer" tool
on your system. Please select "Mixer ToolBox"
streaming", and click "ok". Choose "2CH", "4CH", "6CH", or "8CH" and then you are
allowed to select "Realtek HDA Primary output" to use the Rear Speaker, Central/
Bass, and Front Speaker, or select "Realtek HDA Audio 2nd output" to use the front
panel audio.
4
Description
No Link
Data Activity
Link
Front Speaker
Rear Speaker
(No. 8)
(No. 6)
V
V
V
V
Speed LED
Status
Description
Off
10Mbps connection
Orange
100Mbps connection
Green
1Gbps connection
Central / Bass
(No. 5)
--
--
V
--
V
V
V
V
, click "Enable playback multi-
Line In or
Side Speaker
(No. 7)
--
--
--
V

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Qc5000-itxQc5000-itx/ph

Inhaltsverzeichnis