Logitech Z623 Bedienungsanleitung Seite 5

CONNECT TO AUDIO SOURCE
1A Using a 3 5 mm cable:
Connect one end of the provided 3 5 mm cable to the auxiliary input jack on the back
of the subwoofer and the other end to the 3 5 mm jack on your device
1B Connect one end of the provided 3 5 mm cable to the auxiliary input jack on the right satellite
and the other end to the 3 5 mm jack on your device To adjust the volume on the speakers,
use the volume control knob on the front of the right speaker If you are using the headphone
output on your device, make sure the volume level on your device is set to 80% or higher
2 Using a RCA cable:
Connect one end of the RCA cable to the corresponding RCA jack on the back of
the subwoofer and the other end to the RCA jack your device
NOTE: The RCA cable is not included in the box and must be purchased separately
3 Plug your headphones into the 3 5 mm headphone jack on the right speaker To adjust
the volume of your headphones, use the volume control knob on the front of the right speaker
1A
2
AUX
AUX
RIGHT SPEAKER
LEFT SPEAKER
1B
3
English 5