Attaching The Gate And The Locking Hooks; Use With Baseboards - Gaterol Active Lite Bedienungsanleitung

3.2. Attaching the Gate and the Locking Hooks

C
D
For easy installation, use the provided
templates to mark the wall and locking
hook locations on the wall or frame.
Mount the hook on the wall or frame with the screws (G). If mounting on wood, only use
the screws and do not drill holes unless necessary. If mounting onto concrete or brick,
drill holes and use the wall plugs (H). If mounting on any other material, be sure to use
an appropriate fixing system. Install the locking hooks to both sides of the wall or door
opening and make sure that the gate is properly stretched.

3.3. Use with Baseboards

The gate can easily be installed on top of baseboards at one location.
E
F
If you do not have the template, the dis-
tances from the floor to the lower border
are 0.3 cm (0.1 in) for the lower locking
wall (C), 86.2 cm (33.9 in) for the upper
wall hook (D), 0.3 cm (0.1 in) for the lo-
wer locking hook (E) 86.0 cm (33.9 in) for
the upper locking hook (F).
7