Werbung
Verfügbare Sprachen
Verfügbare Sprachen
User Manual
Introduction
Thank you for purchasing a splitter from the DVI-D range of products. These devices are high
performance DVI-D distribution amplifiers. They allow a DVI-D signal to be split to 2, 4 or 8 DVI-
D enabled displays or projectors for multi-screen presentation.
The DVI-D single link versions with 2 (32447), 4 (32446) and 8 (38108) output ports support
HDCP signals with resolutions up to 1920x1200 or 1080p@60Hz.
Package Contents
▪ DVI-D Splitter
▪ 5V DC PSU
▪ This user manual
Features
▪ Single link versions support resolutions up to 1920x1200 or 1080p@60Hz
▪ Can be cascaded up to 3 layers depending on the cable quality
▪ Single link versions have a built in EDID simulator and HDCP keyset allowing each output to
operate independently. They also support HDMI signals when using appropriate cables and
adapters
Specification
▪ Compliant with DVI 1.0 specification
▪ Amplified outputs allow cable lengths of up to 15m when using DVI SLD cables
Installation
• Make sure all devices are powered off before making any connections!
• Connect all cables and power supplies to the sources, switches and displays.
• Power on the displays, splitter then the source devices to avoid any connection issues.
English
Werbung
