Clas Ohlson 920450 Bedienungsanleitung

Projection Clock
Art.no 36-5513
Please read the entire instruction manual before using the product and then save it for future reference.
We reserve the right for any errors in text or images and any necessary changes made to technical data.
If you have any questions concerning technical problems please contact our Customer Services.
Operating instructions
Inserting batteries
Remove the battery cover on the bottom and insert
2 × AAA/LR03 batteries (sold separately) observing
the polarity markings in the battery compartment.
Refit the cover.
Functions
• Press [ MODE ] to toggle between normal time and
alarm time.
Press [ ▲ ] to select either a 12- or 24-hour clock
•
display (the default setting is 12-hour).
• Press [ ▼ ] to toggle between displaying temperature
in degrees Celsius or Fahrenheit.
Setting the time and date
1. Hold in [ SET ] for about 3 seconds.
2. The hour display will begin to flash. Adjust the hour
setting by pressing [ ▲ ] until the desired hour is
displayed.
3. Press [ SET ] to confirm and continue in the same way
to set the minutes – year – month – date – language
and days of the week*.
* EN = English – GE = German – FR = French – IT = Italian –
NE = Dutch – ES = Spanish – DA = Danish.
Once the settings have been set, the clock will resume
normal time display mode.
Backlight and projection
Temporary display
Press down on the top of the clock to temporarily activate
the backlight and projection of time and temperature for
a duration of about 3 seconds.
Continuous display
The projection of the time and temperature can only be
activated for continuous display if the projection clock is
powered by a mains adaptor.
Set the [ 24H PROJECTION ] selector to ON to activate
the display. Set the selector to OFF to deactivate the display.
GREAT BRITAIN • CUSTOMER SERVICE
tel: 020 8247 9300 internet: www.clasohlson.co.uk
e-mail customerservice@clasohlson.co.uk
Model 920450 white
Compatible mains adaptors are sold separately. The mains
adaptor output should be 3 V DC and the connector plug
should be centre-positive. Clas Ohlson article number
36-4447 is recommended.
Alarm
1. Press and hold down [
the alarm settings mode.
2. The hour display will start to flash. Set the desired
hour using [ ▼ ] or [ ▲ ], and then press [ SET ] to
confirm. Continue with the minutes; press [ SET ] to
confirm.
3. "SNOOZE" will begin flashing on the display. Press
[ SET ] to confirm that you want to activate the snooze
function. "SNOOZE" will appear on the display.
Activate/deactivate the alarm
The alarm is activated or deactivated by pressing [
The (((•))) symbol is shown on the display when the alarm
is activated.
Snooze function
When the alarm sounds, it can be temporarily stopped
by pressing down on the top of the clock. The alarm will
sound again after 5 minutes. Push any button to turn off
the alarm. The snooze function can be used up to 10 times
in succession.
Care and maintenance
Clean the product by wiping it with a soft, dry cloth.
Disposal
This product should be disposed of in accordance with
local regulations. If you are unsure how to proceed,
contact your local council.
Specifications
Size 140 × 90 × 45 mm.
Batteries 2 × AAA/LR03 (sold separately).
] for 3 seconds to enter
].