Herunterladen
Teilen
Diese Seite drucken
MARCOM M1A.1500D Handbuch
  1. Anleitungen
  2. Marken
  3. MARCOM Anleitungen
  4. Verstärker
  5. M1A.1500D
  6. Handbuch

MARCOM M1A.1500D Handbuch

Vorschau ausblenden
1
2
3
4
5
6
7
8

Werbung

Quicklinks

Diese Anleitung herunterladen
M1A.1500D
Owner's Manual

Werbung

loading

Inhaltszusammenfassung für MARCOM M1A.1500D

  • Seite 1 M1A.1500D Owner’s Manual...

  • Seite 2: Front/Rear View

    Front/Rear view 17 18 19 20 2 Ω Low Level Input Gain Controll Low pass cutting adjustment Sub Sonic adjustment Bass Boost adjustment Phase control EBC (External Remote control) EBC ON/OFF switch High pass cutting adjustment High pass switch Led indicator Line Output Fuses 12V (DC) power terminal...
  • Seite 3 Input setting (Eng) Connect the output Audio coming from the car radio, in to the Low level input of the amplifi er. Low Level Input (FR) Relier par un câble RCA de bonne qualité les sorties RCA de l’autoradio aux entrées “Input” RCA de l’amplifi...
  • Seite 4 Crossover and Setting (Eng) The cut frequency is selectable between 30 to 300 Hz. Low pass cutting adjustment (FR) La fréquence de coupure est réglable de 30 à 300Hz. (IT) La frequenza di taglio è selezionabile fra 30 a 300 Hz. ����...
  • Seite 5 Speakers connection � � � � ������ � � ������ ������� (Eng) Minimal acceptable Impedance 2 ohm. To adhere itself to the illustrations for the connections. (FR) Impédance minimale 2 ohm en stéréo, 4 ohm ponté. Suivre les illustrations pour les branchements. (IT) Minima Impedenza accettabile 2 ohm.

  • Seite 6: Power Connection

    Power connection � ������� � ������ � ��� CAR CHASSIS CAR CHASSIS (Eng) Connect the Positive (+12V) directly to the Battery of the car. To make sure itself to insert a fuse of adequate amperage in order protect the system. Connect the Ground in to the car chassis, close as possible to the amplifi...

  • Seite 7: Technical Data

    Features • Class D mono channel power amplifi er • 1500 watts into 2 ohms load • 900 watts into 4 ohms load • High effi ciency Class D design • Variable Low pass x-ower at 24dB/oct • Variable Sub sonic fi lter from 20 to 55Hz at 24dB/oct •...