Replacing The Battery - LIMIT 20 Bedienungsanleitung

4. Connect the test leads across with the object being measured.
The buzzer sounds if the resistance of a circuit under test is less
than 50Ω.

Replacing the Battery

1. Disconnect the connection between the testing leads and the cir-
cuit under test when battery indicator appears on the display.
2. Turn the Meter to OFF position.
3. Remove the screw, and separate the case bottom from the case top.
4. Replace the battery with 2 new 1,5 V battery R6, AAA.
5. Rejoin the case bottom and case top, and reinstall the screw.
(see fig 4)
10
2 0