Blade Maintenance; Cleaning/ Storage; Technical Data - GARDTECH GT19001 Bedienungsanleitung

9.1

Blade maintenance

Always clean the cutting blades after operation and lubricate with oil.
During longer cutting jobs, we recommend periodically lubricating the cutting blade.
Visually check the condition of the cutting edges of the cutting blade.
Ensure that the blade is covered with the blade guard supplied when not in use.
9.2

Cleaning/ storage

Clean the exterior of the machine thoroughly using a soft brush and cloth. Do not use water,
solvents or polishes. Remove all debris, especially from the ventilation slots. Store the
machine in a secure dry place out of reach of children. Do not place other objects on top of the
machine.
9.3 Service department
· Damaged switches must be replaced by our after-sales service department.
· If the connecting cable (or mains plug) is damaged, it must be replaced by a particular
connecting cable which is available from our service department. Replacement of the
connecting cable must only be carried out by our service department (see last page) or by
a qualified person (qualified electrician).

10 TECHNICAL DATA

Model
Battery type
Battery Voltage
Battery Capacity
Charging time (empty battery)
Hedge trimmer: Cutting length
Hedge trimmer: Cutting width
Grass shear: Cutting width
11 NOISE
Noise emission values measured according to relevant standard. (K=3)
Acoustic pressure level LpA
Acoustic power level LwA
ATTENTION! Wear hearing protection when sound pressure is over 85
dB(A).
aw (Vibration)
12 SERVICE DEPARTMENT
· Damaged switches must be replaced by our after -sales service department.
· If the connecting cable (or mains plug) is damaged, it must be replaced by a particular
connecting cable which is available from our service department. Replacement of the
connecting cable must only be carried out by our service department (see last page) or by
a qualified person (qualified electrician).
13 STORAGE
· Ensure battery is removed before storage.
· Battery should be stored between 0 & 45°C, incorrect storage could result in battery
damage.
· Thoroughly clean the whole machine and its accessories.
· Store it out of the reach of children, in a stable and secure position, in a cool and dry
place, avoid too high and too low temperatures.
· Protect it from exposure to direct sunlig ht. Keep it in the dark, if possible.
· Don't keep it in plastic bags to avoid humidity build -up.
GT19001(HL-HT05)
Li-Ion
3.6V
1300mAh
3-5h
120mm
6mm
83mm
81 dB(A)
90 dB(A)
2.2 m/s² K = 1,5 m/s²
13
GB
NL
DE
FR