Herunterladen Inhalt Inhalt Diese Seite drucken

Assembly; Operations; Special Features - Bissell POWERFRESH LIFT-OFF 1897 series Handbuch

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 26

Assembly

To assemble the unit
1. Insert the body into the foot until you
hear the locking tab click.
2. Insert handle into the top of the body.
3. In the middle hole on the left side on the
unit insert the provided screw and tighten.

Operations

Special Features

Easy Touch Digital Controls™
The fingertip power controls are located on the front of the
Lift-Off™ Pod.
NOTE: On/Off button is to turn ON or turn OFF the steam.
Press ON or OFF before choosing HI or LO steam.
(HI) – High Steam Use for durable floors or on sticky messes.
To turn steam on, press once. Click again to turn steam off.
(LO) – Low Steam Use on delicate floors or for light, everyday
cleaning. To turn steam on, click once. Click again to turn
steam off.
Microfiber Mop Pads
Reusable microfiber mop pads are machine washable and
safe for virtually all hard floor surfaces. The white microfiber
pad is best for everyday use on delicate flooring like sealed
hardwoods and laminate. The gray and white striped pad
can be used for scrubbing heavily soiled floors and cleaning
tougher messes.
NOTE: The type and quantity of pads included varies per
model.
Fragrance Discs
Use the fragrance disc with your steam mop to obtain a fresh
scent.
Insert the fragrance disc into pocket inside the mop pad. Use
the whole disc for a refreshing scent or cut in half for a lighter
scent.
Do not plug in your hard floor cleaner until
you are familiar with all instructions and
operating procedures.
1.
Exercise extreme care when using your
steam mop on hardwood floors. Prolonged
application of steam in one area increases
the risk of damage to the surface treatment
on timber floors. Test steam mop in an
inconspicuous area before mopping a
large area. The steam mop generates hot
steam, so move the unit continuously when
cleaning. Regular foot traffic and direct
sunlight will wear down timber floor surface
treatment, making it more susceptible to
steam damage. Check with your timber floor
treatment and application specialist prior
to steam mop operation.
WARNING
2.
WARNING
Tip
» Do not attempt to use your
hard floor cleaner on the
steam setting without water
in the tank. You may hear a
knocking sound indicating
there is no water.
www.BISSELL.com
5

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis