Emerio OFR-111385 Bedienungsanleitung Seite 6

OFR-111385
DESCRIPTION
1. Handle
2. Digital display screen
3. Control panel
4. Power switch
5. Cord storage
6. Fins
7. Wheel
8. Remote control
WHEELS ASSEMBLY
Remove the heater and all the accessories from the carton.
1. Turn the heater upside down.(Fig.1)
2. Position the wheelbase assemblies between the end fins.(Fig.2)
3. Attach them to the heater using the screws and wing nuts supplied. Tighten the wing nuts. (Fig.3)
4. Turn the heater the right way up.
Fig.1
BEFORE USE
Place the heater on the floor at least 50cm away from the wall and 90 cm away from any other objects such as
furniture, curtains or plant.
Make sure the power supply used corresponds to the one on the rating label.
USING THE OIL FREE RADIATOR

Plug the appliance and press the power switch. The appliance will send a beep sound and a red icon
will appear on the digital display screen.

Press the button to turn on the heater. The icon
setting is 30 ℃ and high heat output.

To adjust the heat output, press the "-" or "+" button to select from low heat (symbolized as
screen), medium heat (symbolized as
screen).
To select the desired temperature, press the " ℃/℉ " button. When the temperature numeral flash on

Fig.2
turns to greeen on the screen. The default
on screen) and high heat (symbolized as
- 5 -
EN
Fig.3
on
on