Removing The Battery - Greencut EB400L Betriebsanleitung

42
When placing the battery in the blower, make sure that the raised battery ribs are aligned with the slots on the top
of the blower. Make sure the battery is fully seated and properly adjusted. Incorrect installation of the battery may
damage the internal components.

REMOVING THE BATTERY

• Release the trigger to stop the blower.
• Press and hold the latch button on the bottom of the battery.
• Remove the battery from the blower.
START / STOP THE BLOWER
• To start the blower, press the lock button and pull the trigger.
• To stop the blower, release the trigger.
ATTENTION: The battery tools are always in working condition. Therefore, the operation activation
switch must always be in the OFF / RELEASED position when not in use or when carrying or moving
the tool.