Targus DEFCON SCL Bedienungsanleitung Seite 8

Targus notebook security DEFCON
Using the DEFCON SecureSpacers
1. Insert your DEFCON SCL into the computer's lock slot.
2. Pull the DEFCON SCL away from the computer and check
whether the gap is excessive.
3. If so, try each of the SecureSpacers to determine which one fits the
gap. The SecureSpacers come in three sizes: 1.6 mm, 0.8 mm, and
0.4 mm.
NOTE: DO NOT REMOVE THE ADHESIVE STRIP FROM ANY OF THE SECURESPACERS
UNTIL YOU DECIDE WHICH ONE TO USE.
4. Once you know which SecureSpacer you are going to use, remove
the locking device from the computer. Then remove the adhesive
strip from the back of the SecureSpacer and attach the spacer to the
DEFCON SCL.
® SCL serialised combination cable lock
7